Image

Diamond Plate running board on the same project pictured above.On this application you would use carpet to clean and polish the surface.Total work time about 30 minutes per side
each side is about 18 feet

Image

The photo above is a large aluminum tool box. As you can see an attempt was made to polish it with a scotch pad and liquid rouge polish. The clear strip on the right is a test strip with metalwax. The scratches are really deep from the scotch pad.

The photo below is a shot of half the box cleaned and polished. On this project we used the cleaner first. On the completed half we worked the cleaner about 20 minutes to smooth out the scratches, towel dried the surface and applied metalwax polish to the entire half box, buffed off the polish with terry towels. It works well to divide into 4 sections.They are smaller and easier to work with. The box half below has 3 applications of metalwax. As you can see the reflection is greatly improved with each coat and it has an even shine and most of the scratches are gone.

 Metalwax will give you a long shine time.  With boxes like these a quick re fresh takes about 5 minutes per box with Quick Spray Shine.

 

Image
Image
Image
Image

DIAMOND PLATE RUNNING BOARDS

On this size project you will appreciate the smooth and fast operation of Metalwax and our spray on metal polish. This is a very worth while project for your trailer

Before and after photo of diamond plate fender and running board. Cleaned and polished with metalwax and then finished with a coat of Quick Shine Metal Polish. The spray shine adds more shine enhancment and glass to the shine. Now this fender and running board can be re freshed in under 15 minutes. Photo below is a view of the entire running board.

The wheels are anodized coated. Polished with Quick shine spray on metal polish.

Image
Image
Image
Image
Image

Before & after photos of an aluminum diamond plate dog trailer

 These photos were sent to us by a metalwax customer in Oregon. You can see in the photo upper left the clouds and corrosion has coverd all the diamond plate A  flat pad buffer and metalwax were used to complete this project.It can also be polished by hand. Total work time was about 6 hours. As you can see all the corrosion and the white clouds are gone. The shine is smooth, even and weather proof

We show you these diamond plate examples because they are very large & hard to polish with other brands of polishing products.

 EASY WITH METALWAX

There is no black streaking or smudging. The points on the diamonds are clean and clear. This is a very nicely done polishing project

Yours can look just as good with a little effort. Metalwax will give you the look you want and time on the shine is the longest of any product. After polishing with metalwax a quick re fresh can be applied any time with Quick Spray Shine At true, non abrasive spray on metal polish. Spray on wipe off "It's polished

METALWAX & QUICK SPRAY SHINE

 ARE MADE FOR DIAMOND PLATE

Fast application, easy slide across the surface, complete stain removal, long lasting wax sealed finish. Metal Wax has it all. No other product can match Metal Wax for polishing diamond plate surfaces.

Here's why

Diamond plate is a harder surface than aluminum wheels or fuel tanks.  Other brands of metal polish sell you liquid dirt or compounds and expect you to rub the surface until you wear away enough old metal to make it shine.  Their products can't remove any stains, because all stains are below the surface.  Their compounds can't polish below the surface because the surface is harder than the compounds used to polish it.  So you get very little performance from brand X on diamond plate. METAL WAX CONTAINS NO COMPOUNDS OR ROUGE

It's much faster and cleaner, requires much less effort for more shine. The product is used in two steps.

We give you a real fluoride cleaner to clean the metal first. This product cleans everything from below the surface so you have totally clean metal to polish. The wax is applied right over the cleaner, the two combine together to polish and seal the metal in one easy process. The results are outstanding. No left over rouge or compounds, no hard rubbing, wax on wax off, your done.

Metal Wax fills in the pores and coats the surface to give you a long lasting shine. After all, who wants to keep polishing diamond plate over and over.

Try Metal Wax you will be impressed

WE GUARANTEE IT!

 

Image
Image

Can you see yourself in your diamond plate?

Work in progress on a large diamond plate decor plate

Metalwax makes this size job easy. We give you the right tools!

When polishing diamond plate this size you should clean and polish each large piece in two large sections, bottom to top. Notice the  blue stool. You need this to sit on while you work.

For best results, clean the metal once, then add two coats of metalwax one on top of another. Finish with quick spray shine. Diamond plate may be soaped off to remove black residue. Use large sponge full of water, few drops dish soap in sponge. Wipe down with sponge then hose off with water. Dry diamond plate with clean towel. This works with all diamond plate.

 

Image


Customer Service
ABOUT US
BIG TRUCKS
Aluminum wheels
BOATS
METAL CLEANER
GLASS DISPLAY
SILVER
STAINLESS STEEL
DIAMONDPLATE
TOP WAX
RV'S
Motorcycles
Product Applications
Quick Spray Shine
Distirbutors
Legal & Notices
Fax Back
Horse Trailers
Hollister 2002
Home & Garden
Magazine
Links
Home Page

METALWAX -TRI PAK
AMS CERTIFIED POLISHES

This selection will provide you with all the products you will need to clean, polish and maintain all your metals. It is an exceptional value. The tri pak includes

16 ounces of Quick Spray Shine
16 ounces of metalwax polish
16 ounces of metal cleaner
POLISHING APPLICATORS INCLUDED

VALUE PRICED $69.95

Buy On Line     or      order by phone

Quick Spray Shine & Metalwax are aero space AMS1650 C Type 2  & aircraft approved with spec numbers  Douglas Aircraft CSD #1
Boeing cert numbers D6-17487 rev. P AMS1650 C Type 2
S M I - 05APR481

 

More diamond plate examples. Notice how large the open lid is in the lower photo. It has a nice even shine even though it was polished in 4 sections

Image
Image
Image
Image

CLICK  HERE To see demo videos on how to clean & polish

Aluminum Diamond Plate

PART I                        PART II